Tel:+1 (443) 773-2554

100M unmanaged POE switch 4EP+2E ND

100M unmanaged POE switch 4EP+2E ND
Features of 100M unmanaged POE switch 4EP+2E ND
  •  4*100Mbps POE ports, 2*100Mbps uplink ports

  •  Support 10/100M speed rate, MDI/MDIX and half/full-duplex and auto-negotiation

  •  Each port has complete LED indicator as power indicator, POE indicator, LINK/ACT

  •  VLAN DIP; and 250M long distance transmission

  •  Support IEEE802.d Spanning Tree to make network easier

  •  Support high performance QoS function on each port

  •  Support broadcast storm control

  •  Support 48-56V wide voltage input

  •  Support IEEE802.3x Flow control and Back pressure control

  •  Require no configuration and will instantly operate as soon as you power it up

  •  Default with end-span (1/2+, 3/6-) power supply, Mid-span(4/5+, 7/8-) optional

  •  All port support wire-speed forwarding, 64-1518 Frame can reach wire speed

  •  Support wall mounted installation

  •  Support 4K port lightning protection

  •  Adopt low power consumption chips, stable and reliable

  •  Adopt fanless cooling design, natural cooling

  •  Support POE power supply, support IEEE802.3af and IEEE802.3at, each port can provide up to 30W power supply

The HS 4EP+2EP ND is hot selling100M POE switch with 2 100M uplinks and 4  10/100Mbps RJ45 POE ports. It’s the internal power version with built in power adapter. We also offer external power type for you to choose. It’s one of the most needed models for short distance POE network environments. It’s designed with VLAN DIP which can help to extend the network distance from the limit of 100 meters to 250 meters.


1. Extended distance for POE function.

It breaks the limit of original distance for Ethernet cables and extend the transmission distance from 100M to 250M. With 2 uplink ports, it improves the usage efficiency of POE ports. When it comes to the extend mode, the 4 POE ports can only communicate with the uplink ports and they will not be able to communicate with each other. At this time, the NVR and other cascading cables should be connected with the uplink ports.

2. Imported POE power chipset.

It’s with high quality imported POE power chipset to ensure stable and high-speed performance. When the POE ports are not connected, it will automatically adjust itself into energy saving mode.

3. Compatible with all kinds of network IP cameras.

HS POE swiches are designed to be used mainly for the security field. So the compatibility of POE switches with all kinds of IP cameras would be a top issue to consider.

4. Unique heat dissipation to ensure stable performance.

POE switches are with more power consumption compared with non-POE switches. It’s chipset is also easier to get overheated. So a great heat dissipation solution would be a critical guarantee for POE switches. HS POE switches adopts 2 side design on the PCB to isolate the inner heating system so as to ensure the stable performance of the inner switching system.

5. Support both desktop mounting and wall mounting.

POE switches are designed for security survilliance system. There are 2 options for the mouting ways. We can not only use HS POE switches as desktop switches, but also use them as wall mounted devices.


HS-4EP+2E is a 100M POE Switch with 4 10/100Mbps POE ports, with VLAN DIP it can easily have access to VLAN function. There are 2 10/100MBps uplink port. Longest POE distance can reach 250M. It is designed for school, family, SEMs, small range surveillance and other network connections. All ports support wire speed forwarding and the rate is up to 100Mbps. Each port support 4KV port lightning protection to ensure stable operation.







IEEE802.3 10Base-T

IEEE802.3u 100Base-TX




IEEE802.3x Flow control

IEEE802.3d Spanning Tree

IEEE802.3p QoS



Ethernet Port

Connector: RJ45

Data Rate: 10/100M adaptive

Distance: 250m

UTP Type: UTP-5E or higher level

POE Port

Power supply: end span

Battery core: 1/2+, 3/6-

POE port characteristics: 15.4/30W

POE total power: 65W


Processing Type: Store and Forward

Transmission mode: Full /Half duplex

MAC Table Size: 1K

Buffer Space: 448K bit

Back bandwidth: 1.2G

Time Delay: <150μs


Power Type: external power supply

Input Voltage: AC100V~240V  50/60Hz

Connector: DC Socket

Working Voltage: 48-56V

Power Consumption: 1.4W~3W


Storage Temperature: -40~70℃

Operating Temperature: -10~55℃

Relative Humidity: 5-95% ( no condensation)


1  year

Physical Characteristics

Dimension: 210×150×33mm

Weight: 0.30kg

Color: Metal, Blue

Order information


6*100M Ethernet port, 4 ports have POE function

Note: 1. Default power 52V1.25A.

    2. Default with US standard; GB, EU standards as request.

Contact A Sales Representative Right Now!
Contact us if you have any questions, need an quote or have questions about your orders.
Get in Touch