Support the switch between 100Base-FX and 100Base-TX
2*155Mbps full duplex fiber ports,3*10/100M adaptive Ethernet ports
Support 10/100M rate, support MDI/MDI-X adaptive, support full/half duplex adaptive
Each port has the complete LED Indicator light for installation,commissioning and maintenance
Support single mode single fiber,single mode dual fiber ,multi-mode dual fiber and SFP slot
Support IEEE802.1d Spanning tree
Support IEEE802.1p traffic prioritization protocol
Support high performance Qos function on each port
Support broadcast storm protection
Support max forwarding packet length 2048 bytes option
Support IEEE 802.3x flow control and back pressure control
Require no configuration and will instantly operate as soon as you power it up
Adopt low power consumption Realtek chip,only 2.5W in full load condition
Support non-standard POE function
Built-in IC protection from electrostatic discharge during thunder stroke
The HS 2F3E is a 100M fiber optic switch with 2 100M fiber port and 3 10/100Mbps RJ45 ports. As a starter for 2 fiber port switch series, it would be an ideal choice for small home or office network environments with one to three devices to be connected. For 2F3E we developed 2 models with different size. 2F3E refers to bigger size version with all ports at the same side. It’s more suitable to be wall mounted or cabinet mounted as we can monitor all the link/activity status from the front of switch. There are individual LED indicators for all ports and they are located on the same side of the interfaces.
2F3EM is the mini version; it’s with same size of standard media converter. If end users wants to use multi port switch in a super narrow spaces, it would be a wonderful option. Here let’s get to learn more about the bigger version. By judging from the port numbers, HS 2F3E equals to 1 media converter and 1 1F2E. For the 100M version, we only developed SC connector types, whiles ST and FC can be offered as optional.
The HS 2F3E fiber optic switch is designed with advanced outlet of the PCB and we adopt 100% brand new materials for all the components. For the SMT, we separate the electrical components and pastes on different sides of the PCB to make sure there is a good way for the heat dissipation. With imported chipsets, it ensures the best performance to the most extent and at the meanwhile it can prevent the overheating efficiently. We offer 5V2A DC power adapter for 2F3E, so on the basis of stable data transmission over long distances, it’s super eco-friendly.
HS only works with famous chipsets brands to make sure the heart of our switch series is strong enough, which lays a solid foundation for the performance on our switches. HS 2F3E is with 1G back bandwidth which is sufficient enough for stable 100Mbps network transmission even under full-load status.
The HS-2F3E is a 10/100Mbps adaptive fiber switch. It has three 10/100Mbps Ethernet ports and two 155Mbps fiber ports. It can extend the transmission distance from 100m to 120km via copper cables. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.
IEEE802.3u 100 Base-T
IEEE802.3u 100 Base-TX/FX
IEEE802.3x Flow control
IEEE802.3d Spanning Tree
CCC, CE, FCC, RoHS
Data Rate: 10/100M
UTP Type: UTP-5E or higher level
Connector: SC/FC/ST slot
Data Rate: 155Mbps
Optical wavelength: 850nm/1310nm/1490nm/1550nm
Fiber(Single mode): 8/125,8.7/125,9/125,10/125
Processing Type: direct forwarding
MAC Table Size: 2K
Buffer Space: 2048 bit
Back bandwidth: 1G
Maximum Packet Length: 2048 bytes
TX Power: -14~-8dBm
Link Budget: 18dBm
Input Voltage: AC100V～240V 50/60Hz
Connector: DC Socket
Working Voltage: 5V, 24V(with non-standard POE)
Power Consumption: 1.8W～2.5W
Storage Temperature: -40～70℃
Operating Temperature: -10～55℃
Relative Humidity: 5-90% ( no condensation)
Color: Metal, Black
2×100Base-FX to 3×10/100Base-TX, dual fiber, SC, 20km
2×100Base-FX to 3×10/100Base-TX, TX1310/RX1550nm, SC, 20km
2×100Base-FX to 3×10/100Base-TX, TX1550/RX1310nm, SC, 20km
2×100Base-FX to 3×10/100Base-TX, Bi-Di , SC, 20km
1. Power supply provided by user or order additionally.
2. SC slot connector as default, FC/ST slot as request.