10/100/1000Mbps Fiber switch 8F1E

The HS 8G1E is a 8 fiber port full gigabit fiber optic switch with 8 1000M fiber ports and 1 10/100/1000Mbps RJ45 ports. As the fiber port is also gigabit, we offer you both SC and SFP connector types. The switch offers two Ethernet 10/100/1000Base-T copper ports and eight 1000M SC/SFP slots for fiber optic cables. As a 8 fiber port gigabit switch, it designed with 4.1M super big buffer space, which is same standard for a 24 port gigabit switch. We adopt high end imported chipset to ensure the best data processing ability and it will bring you fast and stable network transmission even under full load conditions.

In previous pages we’ve discussed the advantages for Gigabit Ethernet switch over Fast Ethernet switch and when we should go for a Gigabit Ethernet switch. Except that, if you decide to deploy the Gigabit Ethernet switch in your network, there is also another matter to consider, which is to go for a Gigabit Ethernet switch or Gigabit router.

Generally, home-use Gigabit routers are normally with three or four built in Gigabit Ethernet ports. Most network devices in a home network can support Wi-Fi, so  most home network applications don’t really requires the switch. Only when the Gigabit Ethernet ports on the router are not enough for the current wired devices a Gigabit Ethernet switch would be necessary. For some big housing or between neighbourhoods, Gigabit Etherent switches would be a wonderful idea to realize faster data transmission.

If within the reach of 100 meters LAN cable limitation and also requires gigabit Ethernet transmission, then a gigabit network switch would be enough. However, for much longer distance needs and for networks with more fiber devices as well as end uders involved, it would be better to choose a gigabit fiber optic switch. HS 8G1E would be a perfect solution if there are plenty of users accesing to the same device; it would help to ensure sufficient back bandwidth for multiple users and also ensure stable data transmission.

Introduction

This HS-8G1E series gigabit fiber optic switch extends network distance with highly performance via fiber optic cable. It provides media conversion between 10/100/1000BASE-T and 1000BASE-SX interfaces. There are SC/SFP/WDM connectors with single-mode or multi-mode media for different distance solution as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. As this fiber optic switch fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The 8G1E also supports flow control and back pressure in half-duplex to eliminate packet loss.

The fiber port of the converter operates at 1310 /1550nm with SC connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 100km more are available which it can save more installation..

Specifications

Application

Ordering Information

LEAVE US MESSAGE

SUBMIT