Support the switch between 10/100/1000Base-T and 1000Base-SX/LX
1*1.25Gbps full-duplex fiber port and 4*1000M Ethernet ports with auto-negotiation function
Support 1000M speed rate,MDI/MDIX and half/full-duplex with auto-negotiation function
Each port has the complete LED Indicator light
Support single mode single fiber,single mode dual fiber,multi-mode dual fiber and SFP slot
Support IEEE802.1d Spanning Tree
Support IEEE802.1q and VLAN division
Support high performance QoS function on each port
Support multicast to avoid network congestion
Support 5-12V voltage input
Support 10K Jumbo Packet
Require no configuration and will instantly operate as soon as you power it up
Low power consumption chip with heat sink built in to ensure longtime efficient operation
The HS 1G8E is a 8 port gigabit fiber optic switch with 1 1000M fiber port and 8 10/100/1000Mbps RJ45 ports. Both SC and SFP connector types are available for this model. 1F8E is 100M switch version and 1G8E is the gigabit switch version. After non-stop research, HS developed mature production line of fiber optic switches. End users can choose the auitable model according to their current network needs.
What Is the Difference Between Gigabit Switch And Fast Ethernet Switch?
Except the transfer speed difference and improved performance, the Gigabit fiber optic switch differs from Fast fiber optic switch from the following aspects.
From the beginning, the Gigabit Ethernet ports cost four times the price per port compared to a Fast Ethernet switch. Network engineers’ decision on upgrading is significantly influenced by the big price gap between the Gigabit switch and Fast Ethernet switch. But with the profound development of technology, the cost of Gigabit switches has dropped dramatically. So even common users can afford to expand and improve their home or office network.
Gigabit switches are normally developed with more advanced features to help gurantee a higher network service level and maintain a higher security level as well. With those latest management features, the network administrators can assign QoS and other security policies according to some specific application requirements. Based on the less market needs for fast switches, few fast Ethernet swtiches are normally designed with less features.
Except for the basic functions of providing higher bandwidths and more robust managements, Gigabit Ethernet switches are also much more energy efficient than Fast Ethernet switches. Less power consumptions are produced even with stronger data processing abilities. End users are able to lower their power consumption and costs by updating Gigabit Ethernet switch in their network applications.
The HS-1G8E is an Ethernet Fiber Switch which is specially designed for network monitoring. It has eight 10/100/1000Mbps Ethernet ports and one 1.25Gbps fiber port. It adopts imported Marvell chips to ensure low power consumption and high stability. It extends the transmission distance of a network from 100m to 120km via copper cables. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.
IEEE802.3x Flow control
IEEE802.1d Spanning Tree
CCC, CE, FCC, RoHS
Data Rate: 10/100/1000M
UTP Type: UTP-5E or higher level
Connector: SC/FC/ST/SFP slot
Data Rate: 1.25Gbps
Optical wavelength: 850nm/1310nm/1490nm/1550nm
Processing Type: Store and Forward
MAC Table Size: 4K
Buffer Space: 1Mbit
Jumbo packet: 9216bytes
Back bandwidth: 18G
Time Delay: ＜20μs
Power type: external power supply
Input Voltage: AC100V～240V 50/60Hz
Connector: DC Socket
Working Voltage: 5V
Power Consumption: 2.2W～4.5W
Storage Temperature: -40～70℃
Operating Temperature: -10～55℃
Relative Humidity: 5-90% ( no condensation)
Color: Metal, Black
1×1000Base-SX to 8×10/100/1000Base-T, dual fiber, SC, 20km
1×1000Base-SX to 8×10/100/1000Base-T, TX1310/RX1550nm, SC, 20km
1×1000Base-SX to 8×10/100/1000Base-T, TX1550/RX1310nm, SC, 20km
1×1000Base-SX to 8×10/100/1000Base-T, dual fiber, SC, 40km
1×1000Base-SX to 8×10/100/1000Base-T, BIDI, SC, 40km
Note: 1. Power supply provided by user or order additionally.
2. SC slot connector as default, FC/ST slot as request.