Tel:+1 (443) 773-2554

10/100/1000 Mbps Ethernet Switch 5GE

10/100/1000 Mbps Ethernet Switch 5GE
Features of 10/100/1000 Mbps Ethernet Switch 5GE
  • 5*1000M Ethernet ports with auto-negotiation function

  • Support 1000M speed rate, MDI/MDIX and half/full-duplex with auto-negotiation function

  • Each port has the complete LED Indicator light

  • Support single mode single fiber, single-mode dual fiber, multimode dual fiber and SFP slot

  • Support IEEE802.1d Spanning Tree

  • Each port supports wire-speed switching, 64~1518 frame length can reach the wire speed

  • Support 9216bytes Jumbo packet

  • Internal 4K MAC Address Entities

  • Support high-performance QoS function on each port

  • Support multicast to avoid network congestion

  • Support 5-16V voltage input

  • Support 4KV port lightning protection

  • VLAN DIP effectively solves the network congestion and lagging caused by the broadcast storm. 

  • Require no configuration and will instantly operate as soon as you power it up

  • Use low-power consumption chips, only 2.0W in full load conditions

The HS 5GE is a 10/100/1000Mbps Ethernet Switch hub for FTTD desktop installation. HS 5GE is with 5 10/100/1000Mbps RJ45 ports; as a switching hub, it shares 1 Ethernet cable with other 4 terminal devices such as computer, router or switch, etc.

As the main connecting devices in a LAN network, Etherent switches are one of the most applied network devices. If there are overloaded users, busy APPs and all kinds of servers in your LAN networks, and the network infrastructure is never adjusted with the increase of the above changes then the performance of the network transmission would be severely affected. The best solution would be the apply of a gigabit desktop Ethernet switch.

The function of switches is totally different under different network environments. It's also a different story between adding new switches under the current network environment and replacing current switches with more ports. The point of using switches is to reduce and detect the data flows in the network, if one specific switch has to forward all the packets received under poor deployment, then the other switches will not be able to display their best performance and the transmission speed will also be affected. Except for the position of switches, it will also lead to problems if we deploy switches at locations with small data loads and few packets. Under such circumstances, a switching hub would be a perfect solution. When the current network is not very crowded, a switching HUB would be perfect to solve the current network issues.

HS 5GE is with super small size and nicely designed blue metal case. It can fit in any space as it's super compact. Without extra wiring, it can help to improve your cabinet and desk back to be neat and tidy enough. And as a gigabit switch HUB, it maintains the fast Gigabit transmission speed without any compromise. If you need a small switch HUB and need to connect with less than 5 devices, it would be the perfect choice for you.

Overview of the 5 port gigabit ethernet switch

The HS-5GE series unmanaged switches are full Gigabit switches that are specially designed for high forwarding network environments such as school, family, SMEs and mini monitoring. It has 5 10/100/1000Mbps adaptive Ethernet ports. All ports support wire-speed forwarding and the data rate is up to 1000Mbps. There is lightning protection to ensure smooth and stable operation. Auto MDI/MDIX is also available. No configuration is required, it will instantly operate as soon as you power it up.

Dimension of the 5 port gigabit ethernet switch

5 Port Gigabit Ethernet Switch

Application of the 5 port gigabit ethernet switch

5 Port Gigabit Ethernet Switch

Specification of the 5 port gigabit ethernet switch


IEEE802.3 10Base-T

IEEE802.3u 100Base-TX/FX

IEEE802.3ab 1000Base-T

IEEE802.3x Flow control


IEEE802.1p QoS

IEEE802.1d Spanning Tree



Ethernet Port

Connector: RJ45

Data Rate: 10/100/1000M

Distance: 100m

UTP Type: UTP-5E or higher level


Processing Type: Store and Forward

Transmission Mode: half/full-duplex with auto-negotiation function

MAC Table Size: 2K

Buffer Space: 1Mbit

Back bandwidth: 10G

Time Delay:<25μs


Power Type: external power supply

Input Voltage: AC100V~240V  50/60Hz

Connector: DC Socket

Working Voltage: 5-16V

Power Consumption: 1W~2W


Storage Temperature: -40~70℃

Operating Temperature: -10~55℃

Relative Humidity: 5-90% ( no condensation)


1  year

Physical Characteristics

Dimension: 87.6×79.2×26mm

Weight: 0.20kg

Color: Metal, Blue

Order information of the 5 port gigabit ethernet switch


5×1000M Ethernet ports


Power supply provided by user or order additionally.

Contact A Sales Representative Right Now!
Contact us if you have any questions, need an quote or have questions about your orders.
Get in Touch